hottie amp

Hottie Amplifiers Custom Amp

The Hottie Amplifier custom amp was a limited edition amp launched by the company with all the features of the original Hottie Amp but with the touch of custom made automotive quality finish with candy metallic flames. These amplifiers have a unique design because they are the amplifiers fitted in Vintage American toasters and powered by 9 volts battery.
An amplifier is basically an electrical device that is used to strengthen the weak input signal and provide a more stable and amplified output signal. The amplifier has a similar job in electric guitars, where a weak signal from a guitar is strengthened so that it can produce sound through the loudspeakers.

There can be a separate loudspeaker or it can be adjusted in the same wooden box in which the preamplifier circuit is placed. They can also modify the instrument’s tone by adjusting the frequency levels with the help of equalizers. The amplifiers can also perform other features like adding electronic effects such as distortion and reverberations into the audio. For the guitar players, their choice of settings on the amplifiers reflects their signature tones.
In the 1920s, the first powerful amplifiers and speaker systems were invented for public address systems and movie theatres. These were very large, heavy, and expensive systems and so it was not feasible for the touring musicians to get their hands on these amps. During the mid-1930s, small PA systems more portable than the earlier ones, and the guitar amplifiers were introduced in the market.

The configuration of these amplifiers was pretty simple with one volume control and one or two input jacks. They lacked the tone controls and on/off switch. The early versions of the amplifiers were powered with heavy multiple battery packs, unlike the portable ones that were enabled with built-in power supply circuitry and could be plugged into wall sockets. The use of amps in guitars became widely popular during the 1940s as the craze for Hawaiian music was at a peak in those times which used amplified lap steel guitars.

In the 1960s, the distortion effect in the music gained popularity and later the guitar amps manufacturers started providing preamplifier distortion controls. These amplifiers were initially used with bass guitars and electric pianos. These instruments produced a wider frequency range and thus required full speaker systems for clear and audible sound outputs. For this, the woofer enclosures must be steadily built and should be large in size for mid and high range frequencies.

Considering this, Ampeg introduced the bass amplifier and speaker system in the 1950s which was then heavily used by the bass guitarists.
Later on, with the advancing technology, the guitar amplifiers had graphic equalizers that used vertical faders to control multiple frequency bands and also allowed the precise controls of the tone. The common configuration of the guitar amplifiers includes: The combo amplifier includes one amplifier and one or more speakers in the single cabinet.

The other one is a standalone amplifier that passes the amplified signal via a speaker cable to the external speakers. The distortion feature in the amplifier is processed through the frequency response and other factors in the microphone like preamps, equalization, and compression of the signal.

Also, the guitar’s basic sound can be changed by adding equalization effects before injecting the signal into the amp’s input jack. The basic model of the amplifier has only two tone controls- a passive bass and treble control. On the other hand, the expensive amps have the number of mid-range controls along with graphic and parametric equalizers. Thus, there are many technical specs that help the guitar players attain the desired sound output with the help of amplifiers.
Now talking about the Hottie amplifier custom amp, this amp is a limited edition piece manufactured by the brand to actually amp up the insanity in the guitarists and to add to their aesthetics while they are performing live on stage! You will be surprised to know that the body of these amplifiers is an actual toaster.

The vintage toaster from the 40s and 50s is taken and assembled with a 9-volt battery-powered amplifier and a Jensen speaker which actually makes the old pieces quite useful and they are worth labeling as limited editions in your music studio. The crumb pan of the toaster allows access to the batteries and the amp comes with input and output jacks. The volume and tone settings of the sound are done on the guitar itself.

The amp provides quick distortion with the volume to the input signal through the two toast slots. You will have to connect the amp to the speaker cabinet to fully utilize the amp power and its features. The amp sounds amazing with the hard rock music and does not flip over the slightest tug on the cord which is incredible.

The toaster amp is definitely one of its kind inventions by J.C. Escudie and it is worth the limited edition tag as you don’t get to see such electronics with funky bodies quite frequently. The Hottie amplifiers have a line of such amps with beautiful aesthetics and amazing sound output when an electric guitar is connected with these amps.

The product hit the market in 2008 and it was seen as a unit to increase the looks and add that oomph to the guitarist’s vibes. Along with such amazing performance the amps possessed some unique features that were unexpected to be getting in such compact amps. The output quality was also incredibly smooth when connected to Marshall’s speakers.

No wonder, these amps provided some excellent recordings to the musicians. And there is no denial to the fact that the Hottie Amplifiers Custom Amp is definitely an add on for the live performers to get that right amount of energy and flames from the crowd which is desired to have an extraordinary performance with extraordinary sound output at the same time. These amps are worth giving a try for making any performance a memorable one.