Brace Audio announced the shipping of the DWG1000-TX Digital Wireless Guitar System.

A breakthrough in wireless technology, the Brace DWG-1000 blows away traditional analog wireless systems and gives you something cables can’t: natural tone and freedom to roam the stage or control room.

Frequency response of 10Hz to 15kHz delivers thunderous lows and crystal-clear highs rivaling the most expensive audio cables without the static, pumping, breathing, and dropouts found in dynamics-destroying companding and other side effects of analog systems.  Brace Audio’s unique internal dome antenna design helps immensely for drop out avoidance and also prevents antenna breakage.

The DWG-1000 is rugged and a no-brainer to use. ALL™ Automatic Channel Selection and Locking transparently links the transmitter to the receiver the moment the units are powered on.  Depending upon conditions, up to twelve DWG-1000 Digital Wireless Systems can be used simultaneously onstage and up to six DWG-1000-TX transmitters can link to a single DWG-1000 receiver.

Operating at 2.4 GHz, the DWG-1000 includes a declaration of conformity, so you’ll never worry about their wireless being confiscated when traveling internationally and is certified for use in USA, Canada and the EU.

Transmitter:

*RF Output Power:  16 dBm
*Maximum Input Level:  2.75v peak to peak
*THD:  <2% @ 800 mV pp 1 kHz tone
*S/N Ratio:  more than 90 dB
*Battery Life:  5 hours (AA size battery)
*Output:  33mm, 1/8 in. mono Jack
*System gain: 1
*Frequency:  2.4 GHz, FHSS
*Input Impedance:  600K ohm
Operating Power Voltage:  3.0V Typical
Audio Frequency Response:  10 Hz – 15 kHz
Lower Battery Alert:  15 minutes of life left
Antenna:  Internal dome
Units operating at same time: 8-12

Receiver:
Frequency Type:  2.4 GHz, FHSS
Battery Life:  7 hours (AA size battery)

Product contains
1 Transmitter
1 Receiver
2 – 1/4″ to 1/8″ Guitar Cables
Belt Clip

More information: Brace Audio